How fast is a Polaris Trail Boss 325?

A 2001 Polaris Trail Boss 325 gives no more than 45 mph (72.4 kph), while an ’05 model reportedly can reach 53 mph (85.3 kph) in stock condition.

What kind of oil does a Polaris Trail Boss 325 take?

2 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.

How wide is a Polaris Trail Boss 325?

46.5 in.
DIMENSIONS: Length 71.5 in.;Height 46.0 in.; Width 46.5 in.;Weight 504 Lbs. Wheelbase 49.5 in. ENGINE – Engine 325cc, air-cooled with fan assisted oil cooler, 4-stroke; Fuel Capacity 3.7 gal.

What is the model number for the 2001 trail boss 325?

Page 6 GENERAL INFORMATION 2001 TRAIL BOSS 325 MODEL: ..MODEL NUMBER: A01AA32AA ENGINE MODEL: ES32PFE06/07/08 JETTING CHART 06/07 AMBIENT TEMPERATURE CARBURETION Altitude Altitude Below 40qF Below 40 F +40_F to +80_F +40 F to +80 F Below 5qC +5_C to +26_C Type… Page 7 N / A Shift Selector Box . . .

How do you adjust the chain on a push mower?

To adjust the chain go to the rear of the machine. On the rear of the swing arm there are two pinch bolts. When you loosen them you can rotate the ecentric cam in the center. Rotate it until you have the correct amount of chain slack then tighten the bolts back down.

How to adjust the chain on a dirt bike?

Rotate it until you have the correct amount of chain slack then tighten the bolts back down. If this hasn’t been done for a while then it may be rusty or full of dirt and not turn very easily. It also helps to have the rear axle off of the ground. If your chain will not adjust when you rotate the cam, then it is worn out.

How do you adjust the clearance on a Polaris Ranger intake valve?

Page 40 MAINTENANCE INTAKE VALVE CLEARANCE ADJUSTMENT 1. Insert a .006s (.15mm) feeler gauge between end of intake valve stem and clearance adjuster screw. 2. Using a 10 mm wrench and a screwdriver, loosen adjuster lock nut and turn adjusting screw until there is a slight drag on the feeler gauge. Page 41 Polaris parts.