Helpful tips

How do I set up my Yagi antenna?

How do I set up my Yagi antenna?

Point the main center beam of the Yagi in the general direction of the cell tower. Make sure the radials are pointing up and down. Connect the antenna to a cell phone in test mode. Pan the Yagi left and right in 10-degree increments until you get the best signal strength reading from the phone.

How do I direct my Yagi antenna?

A yagi directional antenna will need to be pointed in the direction of the nearest cell tower. It is important that you are not in contact with the directional antenna when taking a signal strength reading.

How do I connect my Yagi antenna to a router?

Connect the Yagi Antenna to the FireWiFi router by removing one of the two antennas on the back of the router. Connect the SMA Male end of the cable into the back of the router securely. Leave the other small antenna connected into the back of the router. Connect the F Male end of the cable to the Yagi Antenna.

How do I aim my Yagi antenna?

You should aim the outdoor antenna in the direction that best receives the signal from your carrier because a Yagi antenna will not receive any signal that is out of the direction they point to. In other words, if your carrier is out of the beam of the antenna, you won’t receive the boost you’re looking for.

Can you use a Yagi antenna for WiFi?

The yagi antenna is used to direct the WiFi beam. It will increase the signal/reception in the direction it is pointing.

Where is the best place to position an antenna?

Place the antenna in or near a window The fewer obstructions between your antenna and the broadcast towers, the better. And make no mistake–thick walls and ceilings are certainly obstructions. That’s why placing your antenna in or near a window often yields the best results.

Can I add an antenna to my WiFi router?

Most routers and some modems have an antenna connector that you can connect directly too most of our antennas. You will use a pigtail connector or a short adapter cable to connect your antenna with the router.

How do I connect my outdoor antenna to my router?

How to Connect a Wireless Router to an External Antenna

  1. Unscrew the existing antenna in a counter-clockwise direction at its base until the antenna separates from the router.
  2. Screw the new external antenna onto the same connection stud using a clockwise rotation until the connecting ring will not turn any further.

Does Yagi antenna need clear line of sight?

Yagi antennas are ideally suited for long range, line-of-sight communications. In sensor networks, Yagis are often used in outdoor applications like tank level monitoring. If there is no line of sight, a Yagi antenna will not perform well.

Is a Yagi antenna good?

Yagis are directional antennas. Their high gain gives these antennas relatively good range. They have the most gain for their physical size compared to antennas like log periodics. The antenna’s design filters out almost all signal noise coming from the opposite direction.

How do I connect an outdoor antenna to a wireless router?

What is Yagi-Uda antenna?

A Yagi antenna, also known as a Yagi-Uda array or simply a Yagi, is a directional antenna commonly used in communications when a frequency is above 10 MHz. This type of antenna is popular among Amateur Radio and Citizens Band radio operators.

How does Yagi antenna work?

Yagi antenna theory – the basics. The key element to the Yagi theory is the phases of the currents flowing in the additional elements of the antenna. The parasitic elements of the Yagi antenna operate by re-radiating their signals in a slightly different phase to that of the driven element.

What is integrated antenna?

Integrated Antenna Systems offer: Integrated Antenna Systems are constructed using a building block approach and incorporate various customer-defined options. Special antennas are tailored to specific system requirements. For example, to determine the angle of arrival of incoming RF signals, a direction finding antenna may be supplied…

What is a mobile antenna?

Mobile antenna. Mobile antennas are designed to be used for operation while in motion. Their uses include pedestrian mobile operation while walking, bicycle-mounted antennas for use while riding, and the most common form, automobile-mounted antennas for use while driving. Mobile antennas should not be confused with portable antennas,…