What is an arc flash program?

Simply put, an arc flash is a phenomenon where a flashover of electric current leaves its intended path and travels through the air from one conductor to another, or to ground. The results are often violent and when a human is in close proximity to the arc flash, serious injury and even death can occur.

Can arc flash training be done online?

This arc flash training online is designed for anyone who works around or near arc flash safety hazards. Arc flash training benefits everyone from maintenance personnel, electricians, machine operators, to janitorial staff. This online certification course is based on OSHA and NFPA 70E training requirements.

How do I get arc flash certification?

Complete a Hazard Risk Assessment. Complete a blank Arc Flash Label. Determine the Limited, Restricted and Arc Flash Boundaries. Review and Take the Electrical Safety Certification Exam.

Is arc flash required by OSHA?

OSHA does not have a specific requirement mandating that employers have arc flash studies conducted within their workplaces. However, there are a number of OSHA requirements that are a bit broader in terms of protecting workers from electrical hazards.

Why do Arc flashes occur?

In less than a second, an arc flash is initiated from a phase to ground or a phase to phase fault. It can result from accidental contact with the electrical systems, the buildup of conductive dusts, corrosion, dropped tools, or improper work procedures.

When should arc flash PPE be worn?

electrical compartment while switching or investigating energized circuits, appropriate flame resistant clothing and PPE should be worn prescribed on the arc flash label. This does not preclude the use of other required PPE requirements for the job and/or facility. layered clothing per NFPA 70E Table 130.7(C) (11).

How long is 70E training?

The NFPA 70E training course takes about 120 minutes to complete.

How often does OSHA require arc flash training?

every three years
Employees must be retrained at least every three years. There are circumstances where retraining in electrical hazard safety is necessary, even if it hasn’t yet been three years since the last training occurred. ]

How often is arc flash training required?

What is NFPA 70E certification?

NFPA 70E certification is ideal for electricians and other workers whose job responsibilities may expose them to electrical hazards. The course explains common electricity hazards, risk assessment strategies and NFPA and OSHA resources on safe work practices for electrical work.

How long is arc flash training good for?

three years

Do I need an arc flash study?

Arc-Flash Hazard Assessments are required by OSHA and NFPA 70E as a part of an Electrical Hazard Assessment. Arc-Flash Assessments are a serious life safety issue and essential part of a safe and comprehensive electrical safety program.

How do you calculate arc flash?

Sciencing Video Vault. Click the “Calculate” or “Calculate Arc Flash” button once you have filled out all the requested information. Your results will be displayed either above or below the calculator. It will give information about the arc flash itself, and possibly recommend the type of safety gear needed for the given situation.

What is the danger of an arc flash?

Another of the main arc flash dangers is the risk of a fire. When an arc flash takes place, the heat can cause things to ignite almost instantly. This puts the entire facility at risk, and especially those who are working directly in the area.

What causes arc flash?

Sparks due to breaks or gaps in the insulation

What is arc flash safety training?

Arc flash training is a topic that is receiving increased attention in the current safety conscious environment. This is because, apart from the arc flash being the leading cause of injuries stemming out of electrical malfunctions, it is also extremely costly to the company.