Common questions

How do I reset my Roomba 500 battery?

by Bobbi Devlin

How do I reset my Roomba 500 battery?

Reset the Roomba battery 500 and 600 series

  1. Turn on your Roomba by pressing the button “Clean”
  2. Keep pressed during 10 seconds the buttons “Spot” and “Dock” that are placed above and under the button “Clean”
  3. Release the buttons at the same time and you will hear the typical sound of beginning of the Roomba.

How do I reset Roomba battery?

How to reset the Roomba battery?

  1. Press the CLEAN button to turn on the Roomba.
  2. Hit the SPOT and DOCK buttons simultaneously for 10 seconds.
  3. Release both buttons at the same time as soon as you hear the typical beep sound.
  4. Stop loading the robot for at least 12 hours and then try it.

Is there a way to hard reset a Roomba?

Press and hold HOME and SPOT Clean buttons on your robot for 10 seconds. When the button is released, Roomba will play the reboot tone.

How do you revive a dead Roomba battery?

Perform a manual reconditioning every few months. Remove the battery and hold down the power button on the Roomba for five to 15 seconds. This resets the Roomba.

Why will my Roomba not charge?

When your Roomba won’t charge, there are two common situations – making sure either the Home Base has power or no dust on the charging contacts. Sometimes using the wrong kind of battery as well as having issues with the power source can also make your robot not turn on or charge.

How to reset Roomba battery?

Turn the “Power” switch off and flip your Roomba over,exposing its bottom.

  • Depress the tabs on each side of the battery pack; lift the battery pack from the Roomba.
  • Press and hold the “Power” button for five to 10 seconds.
  • Reinsert the battery into the Roomba.
  • Connect your wall outlet charger to your Roomba.

    • How long should a Roomba battery last?

    Charging time under normal conditions is at least 2 hours. When fully charged, the battery light will be green and the battery will last for at least one full clean cycle. With a full charge, Roomba will clean for approximately 60 minutes.

    How to reset a Roomba?

    Pick up your Roomba device and place a finger on the “Dock” and “Clean” buttons.

  • Now,press down these buttons simultaneously
  • Hold these buttons in place until the beep begins to sound.
  • Once you hear the beep it means that it’s reverting back to its default settings.