What does CS enabled do?

Connected Standby is ‘on’ for Windows 8 apps when the PC is ‘off. ‘ It means you can run Windows 8 applications like Skype to provide voice and video services when your PC is in your bag, and much more.

What is CS enabled on a hard drive?

Cable select, also referred to by the acronym CS, is a disk drive jumper setting which automatically sets the priority of a disk drive by its position on its data cable. When cable select is enabled, the drive configures itself as a primary or secondary depending on its position in the drive chain.

What is drive cable?

As a critical function within and between devices, data transfer needs cables that are up to the task. Our SATA, USB, FireWire, and other drive cables are built with quality components for speed and reliability.

How do I know my CPU power management?

Right click the Start menu and select Control Panel.

1. Click Hardware and Sound.
2. Select Power Options.
3. Find Processor power management and open the menu for Minimum processor state.
4. Change the setting for on battery to 100%.
5. Change the setting for plugged in to 100%.

How do I unlock the power plan on Surface devices?

How to unlock Power Plans on Microsoft Surface Devices

1. Type regedit to open Registry Editor.
2. Go to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power“
3. Double click on “CsEnabled”
4. Change Value data from “1″ to “0″
5. Click OK.
6. Restart your computer to apply these changes to your system.

How do you put a jumper on a hard drive?

Connect the drive using the Master connector on the primary IDE cable. Set the second hard disk jumper to Slave (use the Cable Select selection if Cable Select was set on the first hard drive). Connect the drive using the Slave connector on the primary IDE cable. Set the CD/DVD drive jumper as Cable Select.

How do I enable CPU power management?

Here’s how it’s done.

1. Right click the Start menu and select Control Panel.
2. Click Hardware and Sound.
3. Select Power Options.
4. Find Processor power management and open the menu for Minimum processor state.
5. Change the setting for on battery to 100%.
6. Change the setting for plugged in to 100%.

Should I put my computer on high performance?

High Performance: High Performance mode doesn’t lower your CPU’s speed when it isn’t being used, running it at higher speeds most of the time. It also increases screen brightness. Other components, such as your Wi-Fi or disk drive, may also not go into power-saving modes.