Where can I get my check engine light checked for free?

Some of the ways will even be free.

1. At a local auto parts store.
2. Check the codes yourself.
3. Go to your local mechanic.
4. Go to a dealership.
5. My check engine light – no repairs required.

Is an engine diagnostic free?

There are literally thousands of diagnostic trouble codes (DTCs) that the check engine light might refer to. Some auto repair shops charge for auto diagnostic services, but some places, such as autoparts stores, offer to scan your vehicle for free.

How much does a check engine light diagnosis cost?

On average, the fee to have an auto mechanic diagnose a check engine light is $100.

Does O’Reilly do check engine lights for free?

Check Engine Light Testing – Free O’Reilly Auto Parts offers free check engine light testing to help you diagnose the problem. Most of our stores can loan you a code reader for OBD 1&2 systems for vehicles from 1996 and up, except in areas where it is prohibited by law.

Is it bad to drive a car with the check engine light on?

The rule of thumb is that if the check engine light is flashing, you can’t keep driving the car. It’s an emergency. Often it indicates an engine misfire. If you keep driving, you will likely cause irreversible damage, mostly to the (expensive) catalytic converter.

Does Napa check engine lights?

Every driver has experienced that stressful moment when the check engine light comes on. In many cases, it means that something serious is wrong and that you should take your vehicle to your NAPA AUTOPRO centre right away so that a certified technician can identify and fix the problem.

Does Oreilly read check engine codes?

O’Reilly: Our Stores, Your Stories Stop by O’Reilly Auto Parts and we’ll test your Check Engine light codes for free. We can even print out a list of common fixes for the codes, and help you find a repair shop if needed.

Does AutoZone test check engine light for free?

Any auto parts store like AutoZone or NAPA will check it for Free. They use a diagnostic scanner to see what problem code is causing the check engine light. Hopefully you just have an emissions code from not tightening your gas cap well after the last fill up.

Where can I test the Check Engine light?

Connect the wire between the ground (GND) and test engine (TEN) pins, found in the diagnostic box under the hood. Once you connect the wire, the check engine light should flash in a pattern that indicates the code that was thrown. Different vehicles have different names for the TEN pin.

Can you pass emissions test with engine light on?

Do not bring your car in for a state emissions test if the “check engine” light is on. In most states a “check engine” light indicator will cause your car to fail inspection even if the problem has nothing to do with emissions. About the Author.

How to reset check engine light?

1) Use A Scan Tool. Using a scan tool is the easiest way for check engine light reset. 2) Apply The Battery Disconnecting Technique. Using battery disconnecting technique is an old way to reset check engine light. 3) Turn The Ignition On And Off. It’s a repeat of the previous technique without disconnecting the battery. 4) Let The Check Engine Light Go Off By Itself. >> You can check the affordable used car from Japan right here!