How heavy should a trolling sinker be?

In general, you should use a lighter weight sinker in shallower water, and deeper water requires heavier weight. For shallow water, a ⅛-ounce weight works well to create a slow-falling lure action. In deeper water that is up to 20 feet, it’s best to use between ¼ to ⅜-ounce sinker weights.

Do sinkers scare fish?

They can scare fish away, but they can also attract them. Anyone who fishes for fluke/flounder knows that bouncing the heavy weight on the bottom can attract fish. A heavy weight cast on a quiet, freshwater lake can have the opposite effect.

How do you know how deep you are fishing?

Attach a float to your line and a weight where you would normally put the hook. Let it sink and the bobber will give you an idea of how deep the water is. If it’s too deep, it will pull the bobber under and you will need to put more line between the float and the weight.

How fast do you troll crawler harnesses?

The best trolling speed for fishing with a crawler harness is from 1 to 1.4 mph. This is significantly slower than most other baits used in the summer, and the reason for this is that you don’t want to rip off your nightcrawler from the harness by trolling at high speeds.

Can you catch small fish with heavy line?

Yes, fishing line can be too heavy. Adding a bigger line than is recommended on the reel will reduce the line capacity on the spool. Additionally, line that is too heavy for the rod will make it difficult to cast small lures or baits. Line size should be within the range listed on the rod and reel.

How deep can you trolling speed through the water?

The picture below relates depth fished to speed through the water trolling with 50 feet of four-pound-test line and a one-ounce weight. This graph shows that for a 4 mph trolling speed, the trolled depth is 7.8 feet. If the trolling speed is cut in half to 2 mph, the rig’s depth is more than doubled to 19.5 feet.

How deep does a fishing line have to be trolled?

Trolling with a two-ounce weight at 4 mph, 50 feet of six-pound-test line is trolled at a depth of 11.3 feet Four-pound-test is trolled 12.8 feet deep. That is a difference of 1.5 feet or a little more than 10 percent for a line that is 50 percent stronger.

How much does weight affect the depth of a trolled hole?

The graph is the same as the chart except for curves for two additional weights added. For a one-quarter ounce of weight trolled at 2 mph, the trolled depth is 8.8 feet; for one ounce, it is 21.7 feet, and with four ounces, the depth is 39.9 feet. As you see, increasing or reducing the weight makes a significant difference in trolled depth.

How deep can you fish in flicker Shad?

Flicker Shad Dive Chart Get in the Zone Fish are usually in a depth zone. One will be at 15 feet, the next one maybe 18 feet deep, and another one will be 14 feet deep.