Contributing

How do I fix Error 301 on my smart hard drive?

by Bobbi Devlin

How do I fix Error 301 on my smart hard drive?

Steps are:

  1. Go to System Recovery Options.
  2. Run chkdsk /f /r.
  3. Choose Command Prompt to start disk repairing.
  4. Insert Windows installation disc.
  5. Restart the System.
  6. Click the Start button followed by the arrow next to the Lock button.
  7. Now, choose the Language Settings, then click next.
  8. Then click on the Repair option.

How do I bypass smart hard drive error?

How to Disable SMART Hard Disk Error 301?

  1. Step 1: Remove and reconnect your hard drive. Remove your hard drive from your computer. Reconnect the hard drive encountering SMART hard disk error.
  2. Step 2: Enter BIOS menu. Start your computer.
  3. Step 3: Run hard drive test. Choose an option to run hard drive test.

What does Smart HDD error mean?

drive failure
S.M.A.R.T. errors are a near-term prediction of drive failure. It is important to realize that the drive may appear to be functioning normally. Even some diagnostic tests could still have a PASS status. A S.M.A.R.T. error is a prediction that the diagnostic test will soon fail.

How do I fix error in smart detection?

How do I fix Smart status bad issue?

  1. Reboot your computer and recover data.
  2. Disable S.M.A.R.T error from the BIOS.
  3. Check bad sectors on the hard drive.
  4. Back up and replace the hard drive.

What is hard disk imminent failure?

What does hard drive failure imminent mean? When your computer says hard disk failure imminent, it means your hard drive right now is not yet dead, but will be sooner or later. It’s just a matter of time. It could be in 1 hour, could be in a week.

What could cause a hard disk error?

Hard disk errors are typically caused by power outages, hardware failures, poor system maintenance, viruses, or human error. To fix disk errors, you can use the Chkdsk tool found in Windows operating systems.

How do I clear Smart failure predicted on my hard drive?

1 Resolve/Disable the Smart Failure Predicted on Hard Disk Error

  1. Method 1: Use CHKDSK for Bad Sectors and Fix Them.
  2. Method 2: Defragment the Disk.
  3. Step 1: Find Start.
  4. Step 2: Select the Drive.
  5. Step 3: Find Tools.
  6. Step 4: Tools.
  7. Step 5: Click on Scan for and Attempt Recovery of Bad Sectors.
  8. Step 1: Download the Software.

How do I reset my SMART hard drive?

Click the SATA hard drive listing in the left navigation panel, and then click the “Repair Disk” button in the right panel. The Disk Utility identifies and repairs S.M.A.R.T. errors on the hard drive.

What causes a SMART error?

For instance, a collection of bad blocks can be enough to cause a SMART error, or if the drive’s temperature gets too high because of poor ventilation or other environmental conditions, then SMART may issue an error.

How do you fix a hard drive failure?

How to Fix Hard Drive Failure

  1. Clean Out the Computer Vents. Over time, dust and debris will visibly clog up the vents on your computer.
  2. Check the Power and Data Cables. Your hard drive has power and data cables that connect to it from the computer power supply and motherboard.
  3. Check Your Bios.
  4. Listen for Sounds.

How do I turn off imminent hard drive failure?

To fix the hard disk failure is imminent in Windows 7/8/10 and minimize data loss, the most secure way is to do as suggests – backup your hard disk and have it replaced. Now, all you need is to find a trust and reliable backup software.

What is smart hard disk error code 301?

The SMART hard disk error code 301 usually occurs at the time when the computer or laptop boot. What are the causes of 301 hard drive error? Hard Disk 301 error occurs due to several reasons. Following are some of the reasons that cause hard disk 301 error. Well, whatever be the cause, you need to resolve Smart hard disk error. Wrapping Up!

What does smart hard disk error mean?

The SMART hard disk error may occur when you are trying to launch your computer to enter the operating system. If you encounter this SMART disk error, it means that your hard drive is about to fail.

How to fix error 301 in Windows 10?

Use up/down arrow key and select your hard drive to boot Windows. If the Windows starts, log in to your system and immediately backup your data. If it doesn’t boot up, proceed to the next troubleshooting method. 2. Reset BIOS SMART disk error 301 can also occur when there is an issue with the BIOS/firmware.

How to fix smart error hard drive not responding?

Click Start on your computer and choose Computer or This PC to continue. Select the SMART error hard drive and right-click it. Choose Properties to continue. Go to Tools tab and click Check to go on. If there are errors found on the hard drive, you will be asked to check the disk.