Can you Hydro dip designs?

Hydrographic designs require no special printing equipment, and you can use any material that can withstand being submerged in water, such as ceramics, plastics, metal, and fiberglass. You can also hydro dip wood, but you should exercise caution because the process may warp the wood if you do not use a sealer primer.

Does Hydro dipping last forever?

Hydrographic finishes are very robust and will last for many years under normal use. However, similar to your car finish, the paint can scratch if the product is abused. Scratching the protective clear coat can cause failure to the hydrographic finish.

What colors are good for Hydro dipping?

The standard base coat colors for hydro dipping are white and sometimes tan for a camo design. But your base coat can drastically change the final look of a dip. Most films are designed to be applied over a white base coat and that is one reason why you rarely see white printed on a film.

What water is best for hydro dipping?

80 to 90 degrees Fahrenheit
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit. Some dip manufacturers may recommend a specific temperature, such as 80 degrees.

What film do you use for hydro dipping?

The film used in hydro dipping produces a quality and custom finish for any OEM parts. Special inks are printed onto a large roll of Polyvinyl Alcohol (PVA) film. This clear film is water-soluble, which means it will start to break down when floated on water and the activator chemical is applied.

How expensive is Hydro dipping?

Average Costs for Hydro Dipping The average cost for hydro dipping a wheel for a vehicle is roughly $150, and that pricing can vary by as much as 20% – 50%, depending on the type of activator, finish, and labor costs. Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model.

Can you clear coat Hydro dip?

Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.

Can you clear coat over hydro dipping?

What are the different types of hydro dipping patterns?

TSAUTOP have the most popular hydro dipping patterns in stock, such as the skull, flame, carbon fiber, camouflage, cartoon, wood grain, stone, metal, abstract, flower. In these patterns, carbon fiber hydro dip, camo dipping, hydro dipping skull patterns, flame dip film, wood grain hydro dip are welcomed by hydro dipping man.

How long does it take for tsautop to develop hydro dip designs?

TSAUTOP develops 30 new hydro dip designs per month and can customize your hydro dipping patterns in 7-10 days. The hydrographics film you are looking for can be found in TSAUTOP. TSAUTOP have the most popular hydro dipping patterns in stock, such as the skull, flame, carbon fiber, camouflage, cartoon, wood grain, stone, metal, abstract, flower.

What is the hydrographic process used for?

The hydrographic process can be used on metal, plastic (PVC, PP, PE, PET, ABS, ACRYLIC and so on), ceramics, fiberglass, glass, rubber, hardwoods. Chapter 2：What is dipping process?