Can you put slate tile over concrete?

Slate is a type of stone, so slate tiles are durable and ideal for outdoor applications. Slate tiles are best installed over a concrete porch because it is a more stable surface. These tiles should not be installed over damaged or uneven concrete. Level your porch with quick-setting concrete if it has dips or rises.

Can you tile over concrete driveway?

While you can install tile directly on concrete, problems may erupt when the concrete cracks or shifts. All of the movement in concrete is transferred to the tile. Cracks in concrete immediately become cracks in the tile.

How do you adhere slate to concrete?

After 72 hours, apply a high-quality grout and tile sealer over the entire surface of the grout and the slate tile. Apply two to four coats of sealer. If you like the wet, glossy look, apply two coats of glossy sealer over the penetrating sealer coats.

Can I lay tile directly on concrete?

A: It’s perfectly acceptable to put tile directly on concrete — with a couple of caveats. First, it is important to determine if there is moisture coming up from the slab. Those products should help prevent any cracks in the slab from damaging the newly installed tile.

Does cement stick to slate?

Slate tiles differ slightly from other stone tile installations in that they require a wet-mortar bed made of a mixture of Portland cement and sand, rather than standard thinset mortars. If the mortar is too wet, it will slump beneath the stone. Too dry and it may not cure properly in the sun outdoors.

Can you put tile over a concrete patio?

An existing concrete patio or walkway can be tiled as long as water drains off it and any cracks in it are stable and level (one side of the crack shouldn’t be higher than the other).

Can you install slate over concrete?

Installing slate over concrete is a project anyone can complete, but preparation is important. Make sure you have at least 10 percent extra tile for cuts and waste. It is usually a good idea to have 20 percent extra so you will have enough tile on hand in the future to fix and replace any tiles that break.

What is the best subfloor for installing slate tile?

A concrete slab is the best subfloor for any type of tile installation. Installing slate over concrete is a project anyone can complete, but preparation is important. Make sure you have at least 10 percent extra tile for cuts and waste.

How do you apply thinset to a concrete floor?

Set the tile into the thinset. Do not spread more thinset onto the concrete than you can cover in less than 5 minutes. Space the tiles evenly by using tile spacers. Repeat this process over the entire surface of the concrete. Cut tiles as needed with a wet tile saw. Allow the thinset to dry for at least 24 hours.

How to install concrete floor tiles on concrete?

Use the thinset over the concrete base and spread it evenly. You can use a trowel with notches that are proper for the size of the tiles you will be using. Take the tiles and set them in the thinset. Make sure that you do not use more thinset than is necessary.