Do you need a wrench to disassemble a Kimber 1911?

Disassembly of a Kimber 1911 with a Barrel Bushing Disassembly Tools. You will likely need a Barrel Bushing Wrench for this procedure. There are some 1911 Models that will allow you to do this with your fingers, but my experience with my Kimber is that a wrench is definitely needed!

How do I Clean my Kimber tool?

Tool can be rinsed in bore solvent, alcohol or paint thinners should heavy cleaning ever be needed. Tool is CNC machined brass and polished to mirror finish with brushed locking ring. If the Kimber model name stamped on the right side of the slide contains the word “Pro” or “Compact” this tool fits.

How do I know if my Kimber tool fits my model?

If the Kimber model name stamped on the right side of the slide contains the word “Pro” or “Compact” this tool fits. If the model name contains the word “Ultra” this tool will not work. Kimber Ultra models require our KU-2020 tool.

What is a kimkimber 5″ 1911 called?

Kimber calls their 5″ models “Custom”, such as Master Carry Custom. A Pro Carry will have 4″ bull barrel, and a 3″ Barrel 1911 will be called an “Ultra Carry”. These will be addressed in another tutorial.

How do you disassemble a Kimber pro carry II pistol?

Pull the Slide off the Front of the Gun Frame. Place the Slide Upside Down and Remove the Guide Rod, Recoil Spring and Barrel. Kimber Pro Carry II Completed disassembly. You have now successfully performed the disassembly of a Kimber Pro Carry II or Ultra Carry 1911 pistol.

Can You disassemble a Kimber Aegis elite custom 1911 in 45 ACP?

This tutorial will show you step-by-step how to disassemble, break down or Field Strip a 1911 Semi-Automatic Pistol in .45 ACP. Specifically I will be showing the disassembly of a Kimber Aegis Elite Custom 1911 in 45 ACP. Removing the slide on a 1911 is not hard once you have done it a couple times.