How do I reset my Accu-Chek Nano meter?
How do I reset my Accu-Chek Nano meter?
To reset the meter, remove the battery, press any meter button, then reinsert the battery. For further information, and refer to Chapter 7, “Changing the Battery”, in your owner’s booklet. Alternatively, this article gives detailed information about changing batteries in Accu-Chek products.
How do I reset my Accu-Chek guide meter?
Perform a meter reset by doing the following:
- Remove the batteries.
- Press and hold the Power/Set/OK button for at least 2 seconds.
- Reinsert the batteries.
What is code key in Accu-Chek?
Accu-Chek Aviva Expert and Accu-Chek Aviva Combo meters These meters come precoded with a black code key that remains in place for the life of the meter. There’s no need to manually code the meter. If you do not have a black code key, please contact Accu-Chek Customer Care.
How do I connect my Accu-Chek guide to Bluetooth?
Make sure the Guide Me meter is turned off. Android: Open the app and tap on the 3 lines in the upper left-hand corner to open the side menu. Long press both (<) and (>) buttons at the same time for 3-5 seconds until the Bluetooth symbol shows, and 2 interlocked circles are flashing.
What is an Accu-Chek nano meter used for?
Introduction The Accu-Chek Performa Nano System The Accu-Chek Performa Nano meter is designed to be used with the Accu-Chek Performa and Accu-Chek Inform II test strips to quantitatively measure glucose in fresh venous, arterial, neonatal, and capillary whole blood as an aid in monitoring the e ectiveness of glucose control.
How do I use Accu-Chek inform II blood glucose test strips?
If you are using Accu-Chek Inform II test strips, remove the black activation chip and discard it. Page 13 Blood Glucose Tests The test result appears on the display. To assign a marker to the test result, leave the test strip in the meter. See Chapter 2, Marking Blood Glucose Results and Setting the Post-Meal Test Reminder.
How do I Read my Roche blood glucose test results?
Contact Roche. Adjust settings for time and date, Press and release Press and hold (right arrow beeper, test reminders, and to scroll faster. Blood glucose results can be displayed in either mg/dL or mmol/L. The back label of the meter shows the unit of measurement.