How do I reset my toner DCP on my Brother printer?
How do I reset my toner DCP on my Brother printer?
Reset process
- Switch-off the printer.
- Open the front cover.
- Press and Hold the Go button while all the LEDs on the printer’s control panel light-on.
- Release the Go button.
- Press Go twice.
- Press Go 6 times if you want to reset Brother TN-2110 toner cartridge.
How do you reset the drum on a Brother DCP 7055?
Press Clear to reset the drum counter before closing the front cover….Push down the green lock lever and take the toner cartridge out of the drum unit.
- To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.
- Handle the toner cartridge carefully.
Can you refill Brother laser toner cartridges?
Yes, The toner plug in Brother cartridges allow for clean and easy refills without the need to drill a hole into the cartridge. The toner plug is covered by a label sticker.
Can I refill Brother toner cartridges?
TN-630 and TN-660 cartridges are easy to refill thanks to a toner plug on the side of the cartridge. Replacement plugs for TN-630/TN-660 are available on Amazon. Our instructions will guide you step-by-step through the entire refill process.
How do I get my Brother printer to recognize toner cartridges?
Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!
Why does my brother printer not recognize my toner cartridge?
“Cannot Detect” means that either the toner drum unit or the toner cartridge is not properly installed in the machine. If you don’t see a green lock lever to push on the gray drum unit, you may not have the toner cartridge installed in a drum unit.