How do you convert T to m3?

The answer is: The change of 1 t ( tonne (Metric) ) unit of concrete measure equals = to 0.42 m3 ( cubic meter ) as the equivalent measure for the same concrete type.

How do you convert discharge to volume?

1. To convert discharge from mm/day to a volume unit of liters/day use the following formula: mm/day*(0.001m/mm)*total watershed acres*(4047 m2/acre)*(1000 liters/m3) Example: HF1 is 30 acres in size.
2. 4.4 0.6. 2.6. 0.3.
3. Pre. (2009) (a) HF1.
4. 7.5. 11.0. 7.0.
5. Pre. (2009) Post.
6. Midstory. Canopy. Cover.

How much is a cubic meter of stone?

A cubic meter of typical gravel weighs 1,680 kilograms 1.68 tonnes. A square meter of gravel with a depth of 5 cm weighs about 84 kg or 0.084 tonnes. The numbers are obtained using this gravel calculator.

How much water did the hull of the Titanic displace?

Simple multiplication gives Titanic’s displacement at 13,702,600 gallons, or 109,620,800 pints (U.S.). That’s how much water was necessary to reduce Titanic’s buoyancy to zero.

How do you convert cubic units?

You can use the formula for the volume of a prism, V=bwh , to convert cubic units. Since 1 foot = 12 inches, replace b , w , and h with 12 . So, 1 cubic foot is equal to 1,728 cubic inches.

How do you convert discharge to depth?

You must calculate the quantity of water discharged to the area at the time , then divided water quantity (m3) by the area(m2) which received the water. you will get the water depth in m. Multiplying the water depth(m) by 1000 to get water quantity as mm depth.

How do you convert cubic meters per second to cusec?

›› Quick conversion chart of cubic meter/second to cusec. 1 cubic meter/second to cusec = 35.31467 cusec. 2 cubic meter/second to cusec = 70.62933 cusec. 3 cubic meter/second to cusec = 105.944 cusec.

How to convert cumecs to cubic meters per hour (m3/hr)?

How to convert Cumecs to Cubic Meters Per Hour (c to m3/hr)? 1 x 3600 m3/hr = 3600 Cubic Meters Per Hour. Always check the results; rounding errors may occur.

What is 3600 cubic meters/hr in cusec?

The SI derived unit for volume flow rate is the cubic meter/second. 1 cubic meter/second is equal to 3600 cubic m/hr, or 35.314666212661 cusec. Note that rounding errors may occur, so always check the results.

What is the meaning of cumec in reverse conversion?

Reverse conversion? Cumec is short form of cubic meters per second. 1 Cumec = 1 m 3 /s. A flow rate of 1 cubic meter per second. This is the SI unit for flow volume.