How do you reignite a Baxi combi boiler?
How do you reignite a Baxi combi boiler?
To reset the boiler, turn the selector switch to the R (Reset) position. Hold for at least 5 seconds and release. The fault code will be replaced with the boiler’s current temperature. At this point on a neon indicator boiler model, the flame failure light will stop flashing and will be replaced with the burner light.
What does E1 68 mean on boiler?
Error code E168 is displayed when the boiler has detected a problem but can’t work out exactly what it is. This can happen if the boiler has reset after developing a fault or if there has been an issue externally which affects the boiler, such as a fault with the electrical supply.
What does E1 31 mean on a boiler?
Overheat lock out
E131. Overheat lock out. This may follow a power cut, try reset.
How do you release the pressure on a Baxi Duo Tec?
What to do if your boiler pressure is too high
- Attach the radiator key into the square section in the centre of the radiator valve.
- Use a cloth or strong tissue paper to hold the radiator key.
- Have another cloth under the radiator valve to catch any drips.
- Turn the radiator key slowly in an anti-clockwise direction.
Why isn’t my Baxi boiler not firing up?
A common culprit for this fault on Baxi boilers is a lack of pressure. If your system is set lower than 1.5 bar then it won’t operate correctly. Now, the quick fix is to top up the pressure using the filling loop. And once you’ve topped up the pressure, you’ll need to reset the boiler.
What does E133 mean on a boiler?
E133. Indicates that the gas supply has been interrupted, ignition has failed or the flame has not been detected. Ensure that the gas supply has not been turned off, and turn the selector switch to the reset position and hold for at least 5 seconds. If the boiler does not relight, or the code is displayed .
What causes a boiler to lockout?
A boiler lockout is a shut-down procedure that initiates when a boiler is not working within certain tolerances. Boilers can lock out due to low/high water pressure, lack of, or no fuel supply (gas, LPG or oil), a blockage in the system, or the lack of power to electronic components.
What do I do if my boiler says E1?
If the code E119 is displayed (‘E1′ followed by ’19’), this means the pressure in the boiler has dropped and a water leak could be stopping the system working properly. Please report this to us by calling 0300 123 6633.
What fault is E1 on a boiler?
Why is my boiler E1 33?
If your boiler has shut down and is showing error code E133 or E28, then your condensate pipe may be frozen. Do not use boiling water straight from the kettle as this could damage the pipe. Turn the power back on at the wall and restart your boiler. Repeat the process until the boiler works again.