Where is BIOS jumper on laptop?

Look around your motherboard’s surface for a jumper (as shown in the picture) with the CLEAR CMOS label, which will be located on the motherboard and near the jumper. These jumpers are often located near the BIOS chip itself or next to the CMOS battery.

What is a BIOS jumper?

A basic input/output system (BIOS) jumper is a small device used to configure specific settings within the BIOS of a computer. The jumper is attached to a series of metal pins on a computer motherboard, which completes an electrical circuit and configures the appropriate setting.

Does CMOS reset change BIOS version?

In short, no, taking your CMOS battery out just “clears” the BIOS settings. In terms of the “version” of BIOS, that doesn’t change. When you update your BIOS you’re essentially burning new instructions into a chip. The CMOS battery preserves the configuration that is often passed to those instructions.

What does the red CPU LED mean?

CPU: A red light near this indicator means the motherboard does not recognize the CPU, which could mean a number of things. It’s possible the CPU is not plugged in correctly or one of the pins is bent. It could also be the CPU fan is not plugged in. Finally, a dead CMOS battery can also cause the red light to trigger.

What does restore BIOS do?

Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes.

Do I need a BIOS jumper for my laptop?

On a desktop, having access to a BIOS jumper can come in handy. If you need to reset the BIOS to default, or you’ve messed up with your overclocks. The same can be necessary for your laptop. If you’re suffering from a black screen issue, or you need to reset your BIOS to defaults in order to boot up, the BIOS jumper will come in handy.

How do I use the CMOS jumper on my computer?

Locate the 2-pin CMOS jumper labeled RTCRST on the system board. Move the 2-pin jumper plug from the password jumper to the pins on the CMOS jumper. Plug the power cable to the computer and wait for 10 seconds for the CMOS to clear. Move the 2-pin jumper plug back to the password jumper. Replace the computer cover.

How do I find the BIOS jumper on my Toshiba laptop?

This tutorial will show you how to find the BIOS jumper on your Toshiba laptop. 1. Power down your laptop. 2. Disconnect all cables and connections from your laptop. 3. Close the lid. 4. Flip your Toshiba laptop over. 5. Remove the service cover plate.

Where is the password jumper on the motherboard?

To locate the password jumper on the motherboard, look for the letters PWD, PSWD, or PSWDCLR. Remove the jumper from the pins, replace the computer cover, reconnect the power cable and monitor, and turn on the computer. After the Windows login screen appears, turn off the computer. Again, disconnect the power cable and monitor.