How do I connect my remote to my Arris box?

PROGRAMMING DEVICE CONTROL

1. Turn on the TV you wish to control.
2. Locate the code for your TV among the Manufacturer’s Codes on the back of this user manual.
3. Press and hold in the MENU and OK buttons until the Power button flashes twice and release both buttons.
4. Enter in the first 5 digit code for your brand of device.

How do I pair my DTA remote to my box?

setup remote to control the television

1. Press and hold both Digit 1 and Digit 3 keys together until the red light turns on. Release both keys.
2. Point the new remote at the TV. Press and hold the TV POWER key.
3. Point the new remote at the TV. Press TV POWER on your Remote to turn on your TV.

How do I setup my wow remote?

Program WOW! remote by Device Brand Code

1. Turn on your TV manually.
2. Find the brand name and code number of your TV using the table below.
3. Select the SET button and hold it.
4. Without leaving the SET button, tap the POWER button simultaneously.
5. The LED on your remote will turn on solid.

Why is my Arris remote not working?

The most likely cause is that your batteries are old or depleted. Purchase two (2) new AA alkaline batteries. Pull back the remote control’s battery cover to remove it. Replace the battery cover, then test the remote control.

Is Arris a universal remote?

Overview. The ARRIS MP2000 Universal remote control is designed specifically for the Elevate Gateway. This remote control also contains a universal TV and Audio library and is programmable to operate the Volume and Power of your TV or Audio device.

How do I reset my wow remote?

To reset the remote control to factory default settings, use the following instructions. 1. Press and hold the “menu” and “OK” buttons until the power button flashes twice.

How do I reset my WOW cable remote?

1 On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP. 2 Enter 9 – 9 – 3. The last-selected device key will blink twice. 3 Press VOL+ once.