How do I fix a CPU fan error?
How do I fix a CPU fan error?
How to Fix a CPU Fan Error
- Move your computer.
- Stop overclocking.
- Keep your computer cool.
- Clean the CPU fans.
- Check your CPU fan.
- Check your CPU fan’s location.
- Try an alternate CPU fan header.
- Check the CPU fan’s settings in BIOS.
How do I reset my fan speed in BIOS?
Use the arrow keys on your keyboard to scroll through the BIOS menu to the “Monitor,” “Status” or other similarly named submenu (this will also vary slightly by manufacturer). Select the “Fan Speed Control” option from the submenu to open the fan controls.
How do I turn off my BIOS fan?
Highlight the fan status for the fan you wish to disable from the fans listed in the menu. Alter the status using the “+” and “-” keys until it reads “Disabled”. Save the change and exit BIOS by pressing the “F12” key.
How do I disable fan control in BIOS?
Under Power Menu (third tab) look for Hardware Monitor (should be the last item on the left) in the BIOS settings there is a setting to ignore CPU Fan Speed.
How can I control my computer fan without BIOS?
SpeedFan. If your computer’s BIOS doesn’t allow you to adjust the blower speed, you can choose to go with a speed fan. This is one of the free utilities that give you more advanced control over your CPU fans. SpeedFan has been around for years, and it’s still the most widely used software for fan control.
Why is my CPU fan not working properly?
Ensure that the CPU FAN cable is securely installed to the CPU_FAN connector instead of the CHA_FAN. 3. If you install another brand of CPU FAN with lower revolutions speed, the system may not be able to correctly detect it.You can try to set “CPU Fan Speed Low Limit” to 200 RPM in BIOS configuration.
How do I fix a fan speed error in UEFI?
CPU Fan speed error detected. Ensure to install the CPU fan properly onto the CPU_FAN header or adjust/disable the Fan Speed Low Limit option in UEFI. The first thing I check is CPU temperature which seems normal at 36C.
How to resolve the CPU fan error message in post?
When you see the error message”CPU FAN Error”in POST, it means the system doesn’t detect the FAN. You can refer to the steps below to resolve the issue. 1. Please make sure the CPU FAN is installed on the right position of the motherboard and twist the screws tightly. 2.
How to set the CPU Q-Fan control?
For those early versions, you need to set the CPU Q-Fan Control to [Enabled], [Advance Mode] or [Auto]. 4. You can set Monitor->CPU FAN Speed to [Ignore] if you don’t want to open the computer case.