How do I fix F06 error?
How do I fix F06 error?
How to Fix F06 on a Whirlpool Duet
- Touch “Pause/Cancel” twice to cancel the F06 error on the display.
- Plug the power cord back in and select a new wash cycle.
- Press “Pause/Cancel” twice again if the F06 error code resumes.
What does F06 mean on a washing machine?
F06 — Door lock fault. Issue: Washing Machines door cannot be opened or closed / when the door is closed the machine the programme will not start. Advice: If your washing machines door will not close, please check for any obstructions in the door lock.
What does F6 mean on Kenmore washer?
The F6 error code means that the computer on the control didnt detect that the motor reached a high speed on the spin cycle, sometimes it thinks the washer didnt spin fast enough because of a loose wire connection either on the motor or the control boards (motor &machine control) if you find that the washer did …
What does Code F mean on Kenmore washer?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly. You should then be able to open the washer door and remove the wet laundry.
How do I fix error code F06 Indesit washing machine?
Indesit error F06
- Check if there’s any laundry in the door.
- Put the laundry all the way in the drum.
- Close the door and restart the washing machine.
How do I fix F6 error on Whirlpool washer?
The F6 E2 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait five minutes, then plug back in.
Why is my Kenmore Elite washer not draining?
If the washer won’t drain water the drain pump might be defective. It’s also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump. If the washer won’t drain there might be a clogged pump or hose.
What does F code stand for?
FCODE
| Acronym | Definition |
|---|---|
| FCODE | Forth Code (electrical engineering) |
What does F06 error mean?
The “F06” fault code indicates a drive motor tachometer error. This means the control is unable to properly detect motor speed and the machine will shut down.
What does the error code F06 mean on a Kenmore washer?
Kenmore, Washers 3 Answers from these members: The F06 error code indicates a drive motor tachometer error. This error is virtually impossible to accurately diagnose if it is intermittent and not occurring when a technician is present.
What does the error code F06 mean on a Toyota Corolla?
The F06 error code indicates a drive motor tachometer error. This error is virtually impossible to accurately diagnose if it is intermittent and not occurring when a technician is present. The most suspect components that would cause this failure code are the drive motor, the motor control unit (control board) or the wire harness.
What causes a Kenmore washer to stop working?
The most suspect components that would cause this failure code are the drive motor, the motor control unit (control board) or the wire harness. In some instances, this could be caused by severely overloading the washer so that it cannot spin properly.
How do you unclog the discharge hose on a Kenmore washer?
First off the hoses plug so you take off the bottom front lower panel three nuts and clean out the small collection area with the turning handle. It turns to the left to open and then on the back take off the discharge hose and use a small plumbers snake first and then a vacuum to suck out the clog.