What kind of engine does a Nissan A15 have?

The Nissan A15 or A15S is an 1.5 l (1,487 cc) four-cylinder four-stroke gasoline engine from Nissan A-family. The engine was manufactured by Nissan Motor Company from 1979 through 1998. The Nissan Vanette C22 with A15 engine was built in Malaysia at the Tan Chong assembly plant in Segambut (Kuala Lumpur) until 2010.

Where is the Nissan Vanette C22 with A15 engine made?

The Nissan Vanette C22 with A15 engine was built in Malaysia at the Tan Chong assembly plant in Segambut (Kuala Lumpur) until 2010. The A15 motor uses a lightweight cast-iron block and an aluminum cylinder head, with overhead valves and single camshaft. Bore and stroke were 76.0 mm and 82.0 mm, respectively.

What kind of camshaft does an A15 have?

The A15 engine has two compression and single oil control ring. The valve system has a push rod type rocker arm which uses the single type valve springs. The camshaft is driven with a double row roller chain from the crankshaft. The tension of the chain is controlled by the chain tensioner which is operated with spring and oil pressure.

What is the bore size of a Mercedes Benz A15?

The cylinder bore is 76.0 mm (2.992 in) and the piston stroke is 82.0 mm (3.228 in). The A15 engine has two compression and single oil control ring.

What kind of engine does a Datsun A12 have?

Datsun had a factory 83hp A12 engine. It had the large-port cylinder head, twin carburetors, a high-RPM camshaft, 3-into-2-into-1 exhaust manifold, flat-top pistons (pistons alone were probably worth that extra 3 hp). Same size valves as regular A12, same size 1.5″ exhaust.

How many CC is a A15 engine?

A15 Engine. The A15 is a 1488cc engine produced from 1979 through 2011. The stroke was increased by 5 mm from the A14 engine’s 77 mm to measure 82 mm. It produces 85hp.

What is the difference between A14 and A15?

A15 Engine. The A15 is a 1488cc engine produced from 1979 through 2011. The stroke was increased by 5 mm from the A14 engine’s 77 mm to measure 82 mm. It produces 85hp. At first it used a different block casting but the same ‘tall-block’ deck height as the A14.